| Picture |
Heading |
Updated |
 |
500 KVA Epoxy Resin Cast Delta Star Dry Type Step Down Transformer
This 500 KVA epoxy resin cast delta star dry type step down transformer produced by Gnee has a rated voltage of 10KV. The rated power of the transformer is 500 KVA.https://www.chinasiliconsteel.com/silicon-steel-transformers/dry-type-transformer/500-kva-e |
2025-04-03 |
 |
125 KVA 10 KV Epoxy Resin Cast Dry-Type Transformer
This 125 KVA 10 KV Epoxy Resin Cast Dry-Type Transformer produced by Gnee has a rated voltage of 10KV. The rated power of the transformer is 125 KVA.https://www.chinasiliconsteel.com/silicon-steel-transformers/dry-type-transformer/125-kva-10-kv-epoxy-resi |
2025-04-03 |
 |
10 KV Three-phase Resin-cast Insulated Dry-type Power Transformer
The 10 KV three-phase resin-cast insulated dry-type power transformer is manufactured in compliance with the International Electrotechnical Commission (IEC) standard 60726 and the National Standards of the People's Republic of China GB/6450 and GB/10228, |
2025-04-03 |
 |
30-2500 KVA 10 KV Oil Type Distribution Transformer
This 30-2500 KVA 10 KV oil type distribution transformer produced by Gnee has a rated voltage of 10KV. The capacity range of the transformer is 30-2500 KVA.https://www.chinasiliconsteel.com/silicon-steel-transformers/oil-immersed-transformer/30-2500-kva-1 |
2025-04-03 |
 |
30-2500 KVA 10 KV Whole Sealing Oil-immersed Distribution Transformer
With over 18 years of transformer export experience, Gnee specializes in manufacturing 10 KV whole sealing oil-immersed distribution transformers with capacities ranging from 30 KVA to 2500 KVA.https://www.chinasiliconsteel.com/silicon-steel-transformers/ |
2025-04-03 |
 |
Three-phase Oil-immersed Power Transformer
With over 18 years of transformer export experience, Gnee specializes in manufacturing three-phase oil-immersed power transformer with capacities ranging from 30 KVA to 1600 KVA.https://www.chinasiliconsteel.com/silicon-steel-transformers/oil-immersed-tra |
2025-04-03 |
 |
Materials Cold Rolled Non Oriented Electrical Steel Sheet in Coil
Cold rolled non oriented electrical steel sheet in coil, also called silicon steel coil, contains 0.5% to 3.0% silicon. Electrical steel coil with thickness 0.5mm is once formed through cold rolling the 2 to 3mm thick hotrolled coil which has already been |
2025-04-03 |
 |
23QG095 CRGO Iron Sheet
23QG095 CRGO iron steel is kind of high permeability type cold rolled grain-oriented electrical steel strip, with a nominal maximum specific total loss P1.7/50 of 0.95 W/kg, nominal thickness is 0.23mm, supplied in the fully processed state.https://www.ch |
2025-04-03 |
Friends links